WEAR VALLEY TANKS SUPPLIERS OF IBC STILLAGE TANKS & FITTINGS 07974 158 825 WE NOW ACCEPT CARD PAYMENTS OVER THE PHONE wearvalleytanks@gmail.com
TANK COLLECTION ONLY:
(please ring as our yard is not always manned)
07974158825
Based just off A689 Toronto bypass
Bishop Auckland Dl14 7SB
Next to Kynren
8 miles from A1 Junction 60
IBC Stillage Tanks and Fittings
Stillage Tanks and Fittings
Stillage Tanks and Delivery
Stillage Tanks Fittings and Advice
IBC trailer water carrier bowser
Stillage Tanks Fittings and Advice
IBC trailer water carrier bowser

All our connections are straightforward and simple but if you do have any difficulties with fitting - below are a few tips and tricks to solve any issues you may have.

If you still require advice on fittings please call us on: 07974 158 825

Removing the IBC tank from its Metal Cage:

Removing the IBC tank from its Metal Cage Remove the four holding screws from both of the horizontal top bars.
Removing the IBC tank from its Metal Cage Roll the unit onto its side - ensure the outlet is facing upwards.
Grasp one of the horizontal top bars....
Removing the IBC tank from its Metal Cage ...pull towards you and the plastic tank slides easily from its metal frame.
Reverse the procedure to replace the tank.

Changing the Outlet Valve:

Changing the Outlet Valve Loosen the valve fitting from the thread end using a Stilson or similar.
Changing the Outlet Valve Unscrew the valve by hand. Do not use the valve handle to unscrew the fitting.
Changing the Outlet Valve Your IBC outlet can now be fitted with an attachment to suite your requirements.

Measuring your Fittings:

Measuring your Fittings This is the measurement of a normal standard 55mm tank outlet.
Measuring your Fittings This is the female measurement of the standard 55mm thread ‘blue handle’ valve we sell.
Measuring your Fittings This is the female measurement of the 75mm thread ‘red handle’ valve we sell.

Quick Check for which Tap Size is Required:

Quick Check for which Tap Size is Required Remove old tap (see second section above). Turn tap around and line up against tank outlet
Quick Check for which Tap Size is Required hole. If thread is identical size and bore you will require a BLUE handle tap. However if the tank
Quick Check for which Tap Size is Required bore hole is larger than the tap outlet thread you need to purchase the RED handle tap.

Threaded Extension Spout:

Threaded Extension Spout These spouts can be bought as a single item but unlike other spouts that we sell...
Threaded Extension Spout ...they have a male thread on the outlet point so they can be attached to one another...
Threaded Extension Spout ...giving extra reach, to prevent spilling and splashes or to suit a specific purpose.